deep groove ball bearings

Contact Now

They accommodate radial and axial loads in both directions, are easy to mount, and require less maintenance than other bearing?types Single-row deep groove ball bearings?are the most common type of?rolling bearings. Their use is very widespread. In addition to open type?bearings,these?bearings?often have steel shields or rubber seals installed on one or both sides and are prelubricated with grease. 

Replacing deep groove ball bearings with plain bearings can offer a range of benefits, including lower cost, less maintenance, greatly reduce noise at low speeds and easier installation. Plain bearing can also have a higher load capacity, simplified assembly, increased longevity, reduced housing dimensions and assembly size and weight.

Deep groove ball bearings are the most common type of ball bearing. They are commonly used in electric motors and in household appliances, car motors, office machinery, automation control, and garden and household tools. They have deep raceway grooves and their race dimensions are close to the dimensions of the balls that run inside.

35 mm x 72 mm x 17 mm NTN 6207NR deep groove ball bearings

44,45 mm 30,162
3782/3720 93,264 mm

4 mm x 7 mm x 2,5 mm NTN WA674ASA deep groove ball bearings

100 91,15 kN
34 mm 3,15 Kg

12 mm x 37 mm x 12 mm NTN EC-6301 deep groove ball bearings

0.5 mm 19.583 mm
1.53 Imperial

25,000 mm x 62,000 mm x 17,000 mm NTN 6305LLUNR deep groove ball bearings

17 mm 0.31 kg
(2) Outer 2.835 Inch | 72 Mill

105,000 mm x 160,000 mm x 26,000 mm NTN 6021Z deep groove ball bearings

32206-B 14.1
-3.3 mm Y32206-B

25 mm x 47 mm x 12 mm NTN 6005LLH deep groove ball bearings

0.156 275
0.2810 52100 Chrome steel o

15 mm x 35 mm x 11 mm NTN 6202LLU deep groove ball bearings

0.3 mm Single Row
12 mm 11,900 N

110 mm x 170 mm x 28 mm NTN 6022 deep groove ball bearings

22 mm M14×1,5
19 mm 17 mm

200 mm x 310 mm x 51 mm NTN 6040 deep groove ball bearings

200 mm x 310 mm x 51 mm 1,5 mm
23 mm 90

40,000 mm x 80,000 mm x 18,000 mm NTN 6208LHA deep groove ball bearings

675 kN 52 mm
NUP 236 4 mm
1/47